Save 47%

Milano 14mm European Oak Flooring- $49m2

Reduced even further! Only while stock lasts - $49m2 + gst. Only 147m2 left.

Specifications

1900 x 190 x 14.5mm boards
Tongue & groove boards
Micro bevelled edge
Hand Scraped & Distressed Finish
20% Gloss level
Box size = 2.166m2
6 board per pack, all full lengths

Our Milano Oak engineered hardwood is premium grade European Oak. The flooring consists of a layer of natural solid wood on top of a base of high-quality plywood. Engineered Hardwood is proven to be more resistant to variations of moisture and temperature than solid wood floors because of the stable base of high-quality plywood layers which also helps to avoid gaping and peaking.

Specifications

Board size: 1900mm x 190mm x 14.5mm

Wear Layer: 3mm

Coating: UV Lacquer 8 - 10 Coats

Finish: Range available in Smooth, Wire Brushed, Hand Scraped, 20% Gloss or Matte

Installation: Floating or Direct Stick, Tongue & Groove system

Box size: 2.166m2 - 6 boards - All full boards

What Is Engineered Timber Flooring?

Engineered timber flooring is a multi-layered floor composed of a timber veneer or lamination surface layer sitting on a cheaper substrate such as ply, pine, hevea, or rubber wood.

Engineered timber usually is a pre-finished product with 6-12 layers of lacquer applied in the factory. Depending on the thickness of the wear layer, it can generally be sanded and refinished in the future.

It is more cost-effective and stable than solid timber flooring. It is strong, durable, and less prone to splitting and gapping.

Recommended Use

Pre-finished Solid & Engineered Timber Flooring is recommended for use in internal residential or commercial areas including, but not limited to, living areas, kitchens, bedrooms, hallways and stairs.

DO NOT INSTALL in bathrooms, laundries, toilets, saunas, or areas subject to regular moisture or water.

Storage:

Ensure the environment resembles installation conditions (20°C and 40-60% humidity) to avoid material damage. Cartons should be placed in the installation area and remain unopened until commencement of installation.

Heated Subfloors

Our pre-finished solid timbers are not recommended for installation over heated subfloors.

Most Engineered Timber Flooring can be installed over a heated slab using both installation methods – direct stick or floated. Most manufacturer's do not recommend installing Australian species timbers over underfloor heating. Please check with the manufacturer or supplier before installing.

The in-slab under floor heating needs to be started and run at desired temperature for at least 2 weeks prior to installation.

After 14 days, turn off slab heating and allow 4 days to pass in order to allow subfloor to cool down and reach room temperature before installation. Heating system temperature is to be increased by 2 degrees increments each day until desired temperature is reached (not exceeding 25 degrees Celsius) and when turning your heating off, also decrease by 2 degrees increments each day until it is off.

Subfloor Preparation

Ensure the subfloor is flat. For floating floors this generally does not exceed 3mm beneath a 1m long straight edge. For direct adhesive fix applications, 3mm beneath a 3m long straight edge applies. For concrete subfloors a moisture barrier is required.

After Installation

Avoid placing rugs, mats, or very heavy furniture on the floor until it has fully acclimatised, which typically takes about 8 weeks. Additionally, direct sunlight should be minimised with window coverings to prevent heat-related damage.

Product Warranty

Lifetime Structural Warranty
Covered by a Lifetime Structural Warranty. Under normal residential conditions and with proper maintenance, the product will be free of structural defects such as delamination, buckling and twisting. This structural warranty does not cover surface wear.

20 Year Residential Wear Warranty. The Range is covered by a 20 Year Residential Wear Warranty. Under
normal residential conditions and with proper maintenance, the coating system will not wear through within 20 years from the date of installation. Gloss reduction and scratches are not considered wear through and are therefore not covered by this warranty. Please refer to our Residential maintenance guide for information on how to maintain your floor.

10 Year Commercial Wear Warranty

The Range is covered by a 10 Year Commercial Wear Warranty. Under
normal commercial conditions and with proper maintenance, the coating system will not wear through within 10 years from the date of installation. Gloss reduction and scratches are not considered wear through and are therefore not covered by this warranty. Please refer to our Commercial maintenance guide for information on how to maintain your floor.

Delivery & Pick Up Options

For supply only orders, our hard flooring can be picked up from our Blackburn showroom or from our supplier warehouses. Please contact us to see if we have a warehouse located in your area.

Pick up from the warehouse incurs a $45 handling charge for quantities less than 1 pallet. Pick up from our showroom may incur a handling charge depending on the product ordered.

Delivery can be arranged for most areas in Australia. Please contact us for a delivery quote.

Care & Maintenance

It is only natural that timber floors will show signs of wear over time. You can expect years of beauty from your floor with regular cleaning and maintenance routines.

Never flood or wet mop the floor as severe damage may occur. Any damage caused by excessive moisture will void the warranty.

Always apply felt pads under any furniture or chair legs to prevent scratches.

Exposure to sunlight's UV rays accelerates oxidation and aging of materials. This may change the colour of the floor. Periodically rearrange the furniture to allow the floor to age evenly.

Never use any of the following products (or similar in nature) on your floor: ammonia-based cleaners, acrylic finishes, wax-based products, bleach, polishes, oil soap, abrasive cleaning soaps, or acidic materials such as vinegar. Many of these products pit
or etch the finish of your flooring or prevent the proper use of recommended maintenance materials.

Damp mop with a pH neutral detergent such as Bona products designed specifically for Timber flooring.

KEY BENEFITS

Pre-Finished Coating

Allergy Friendly

Increase Property Value

Low VOC Emissions

Low Maintenance

Each Board Is Unique

Environmentally Efficient

Is Engineered Timber Real Wood?

Yes. The top layer consists of a real timber such as European Oak or Aussie species, with the core generally being ply or other less expensive timber such as birch, pine or hevea.

This construction provides the look and feel of a solid timber with lower supply and installation costs.

How Is Engineered Timber Installed?

Engineered Timber flooring is generally installed either as a floating floor with an underlay laid underneath, or directly glued to the subfloor.

When installed on stairs the timber is glued down to each step. If glued onto a concrete subfloor, a moisture barrier will be need to be applied.

If the individual boards are tongue and groove, glue will still need to be applied in each groove regardless of the type of installation.

Can Engineered Timber Be Refinished?

Yes. In general, if the wear layer has a minimum of 3mm then the timber can be sanded and refinished multiple times.

Is Engineered Timber Expensive?

Not necessarily. While timber is generally more expensive than other types of flooring there are many options available for those on a budget.

We have timbers with 0.6mm or 2mm veneers which allow for the look and feel of real timber with a cheaper price. Once installed you won't be able to tell the difference from a more expensive timber.

We also have many specials on high quality timbers such as discontinued or clearance colours.

ORDER NOW, INSTALL LATER

Not quite ready for your flooring? Pay a deposit and we will store it for you for up to 12 months.

FAMILY OWNED BUSINESS

We are an family owned Australian business. This means no huge business franchise fees so lower prices for you, the customer!

FREE MEASURE & QUOTE

We can visit your home or business for an inspection. No obligation to accept the quote.

STAIRS & ACCESSORIES

Have stairs or need to transition to other flooring such as carpet? Our hard flooring products have matching colour stair nosings & trims for a seamless look.

"I recently had flooring installed by Eastern Flooring and I couldn’t be happier with the result. The quality of the product is outstanding, and their customer service was excellent from start to finish. The team was professional, punctual, and paid great attention to detail during the installation. Everything was completed on time and exactly as promised. Highly recommend them."

"I just had my floor boards which I purchased from Eastern Flooring and had them installed by them. I can't express enough how happy I am with the floor boards. I made the right choice and I love them. My cat is very unhappy cause he can't scratch anymore. Lol. Mercifully I had an old carpet so I let him play with it. The workmanship on the floor boards was excellent and would recommend anyone."

"Eastern Flooring Centre offers Great products, Great Customer Service, Honesty and reliability all around. The team is highly experienced in all areas of flooring and were able to provide us with the right products and choices for our shop. They arranged for the installation of our floor boards ahead of time and also followed through with the after sales service and care. Highly recommend The Eastern Flooring Centre for all your flooring needs!
Thank you again Eastern Flooring Centre"

"We are very happy with the service provided with eastern flooring Very efficient and organised . The product information given to us was very helpful and informative . Also the floor laying crew were professional and experienced and did a great job"

Milano 14mm European Oak Flooring- $49m2