Elegance Oak 12mm Laminate Flooring

Board size: 2200mm x 193mm x 12mm

Finish: Matte, 4D High Definition Wood Grain, Embossed in register

Surface: Waterproof click and waxing technology help to protect the board from moisture.

Core: Water Resistant up to 72 hours.

Wear Rating: AC5

Phthalate free

Installation: Floating, Valinge 5G click system

Box size: 2.13m2 - 4 boards

Laminate is a multi-layered floor made from high density fibre board with a water resistant wear layer.

A combination of High Definition (HD) digital printing and Embossed in Register (EIR) texture results in a floor that is indistinguishable from a natural timber
floor.

Water Resistant Laminate Flooring is recommended for use in internal residential or commercial areas including, but not limited to, living areas, kitchens, bedrooms, hallways and stairs.

DO NOT INSTALL in bathrooms, laundries, toilets, saunas, or areas subject to regular moisture or water.

Heavy objects such bookcases, billiard tables, kitchen units, that exceed 200kg/object area or if the load is greater than 30kg/cm2 should not be placed on a floating system. Damage can occur due to incorrect expansion and lack of correct raft movement.

If this flooring is intended to be installed over an existing wooden floor, it is recommended to repair any loose boards or squeaks before you begin installation.

Storage:

Ensure the environment resembles installation conditions (20°C and 40-60% humidity) to avoid material damage.  Cartons should be placed in the installation area and remain unopened until commencement of installation.

Heated Subfloors

Laminate Flooring can be installed over a heated slab. 

Ensure the radiant heat surface temperature never exceeds 27°C (81°F). Before installing over newly constructed radiant heat systems, operate the system at maximum capacity to force any residual moisture from the cementitious topping of the radiant heat system. The maximum moisture content of the screed is 1.5% (CM method). Shut down the floor heating at least 48 hours prior to installation. Make sure that the temperature in the room is at least 15°C (60 °F) during installation. It is recommended that the radiant heat be applied in a gradual manner after installing the laminate floor.

Subfloor Preparation

Ensure the subfloor is flat and free from debris. For floating floors this generally does not exceed 3mm beneath a 1m long straight edge.  For concrete subfloors a moisture barrier is required.

After Installation

Avoid placing rugs, mats, or very heavy furniture on the floor until it has fully acclimatised. Additionally, direct sunlight should be minimised with window coverings to prevent heat-related damage.

For supply only orders, our hard flooring can be picked up from our Blackburn showroom or our Blackburn warehouse.

Pick up from the warehouse incurs a $45 handling charge for quantities less than 1 pallet. Pick up from our showroom may incur a handling charge depending on the product ordered.

Delivery can be arranged for most areas in Australia.  Please contact us for a delivery quote.

20 Year Residential Wear Warranty

5 Year Light Commercial Warranty

Lifetime Structural Warranty

Our warranty covers, from the date of purchase, your floor will be free from manufacturing defects and will not wear
through when installed and maintained according to these instructions. This guarantee applies only to the original end user and proof of purchase is required for all claims. The guarantee is for replacement or refund of the material only, not labour costs. Claims for wear must show a minimum dime size area.