Acouslime Moisture Seal is a ready to use, premium solvent free, polyurethane moisture barrier and primer, for waterproofing concrete and cementitious substrates. Available in 13 kg containers.
Features:
- Ready to use, no mixing required
- Solvent and water free
- Ultra-fast curing
- Water resistant when cured
- Approved for radiant heated slabs
- 100% odourless
- Zero VOC
- Excellent coverage
Acouslime product selection based on RH in slab (Relative Humidity/ Moisture Content)
Up to 85% RH Acouslime Timber Flooring adhesives contain a moisture vapour barrier A one step process including Adhesive. Refer to Proceed to STEP 3 if levelling required Acouslime 3 in 1 has a Moisture Vapor Barrier and stabiliser Acouslime 4 in 1 has a Moisture Vapour Barrier, Acoustics (rated 43dB) and stabiliser
84% – 90% RH ASTM F2170-02 One coat of Acouslime Moisture Seal to be applied to the substrate.
90% - 98% RH ASTM F2170-02 Two coats of Acouslime Moisture Seal to be applied to the substrate. Allow 2 – 4 hours drying time between coats, dependent on weather conditions. 98% RH Upwards Slab is too wet/green not suitable for Timber Flooring installation.
AREAS OF APPLICATION :
▪ Waterproofing treatment before the laying of wooden flooring to block the rise of excessive residual dampness in the screeds
▪ Porous subfloors
▪ Non-porous subfloors
▪ Solidifying soft and brittle subfloors
▪ Green concrete slabs
▪ Radiant heated slabs (two coats recommended)
▪ Anti-dust treatment for cementitious screeds when the surfaces are irregular, porous and dusty